How to Change a Coil Without Losing Juice: Step-by-Step Guide
Vaping has become increasingly popular over the years, with more and more people choosing it as an alternative to smoking. One important component of a vape device is the coil. The coil is responsible for heating up the e-liquid and turning it into vapor. Over time, coils can become worn out and need to be replaced. However, changing a coil can be a messy process, often resulting in the loss of e-juice. In this step-by-step guide, we will walk you through the process of changing a coil without losing any juice.
Gather the necessary tools and materials
Before you start changing the coil, it’s essential to gather all the necessary tools and materials. You will need a replacement coil, a pair of tweezers or pliers, a paper towel or cloth, and a small container to store any excess e-juice.
Prepare your vape device
The first step is to prepare your vape device for the coil change. Start by disassembling the tank from the rest of the device. Most tanks can be unscrewed from the base or the top. Once the tank is separated, empty any remaining e-juice into the container you have prepared. This will help prevent any spills or leaks during the coil change process.
Remove the old coil
To remove the old coil, you may need to unscrew it from the base or the top of the tank, depending on the type of tank you have. Use the tweezers or pliers to grip the coil and gently twist it counterclockwise to loosen it. Be careful not to apply too much force, as this can damage the tank or coil.
Clean the tank
After removing the old coil, it’s a good idea to clean the tank before installing the new one. Use warm water and a mild soap to clean out any residue or e-juice that may have accumulated. Rinse the tank thoroughly and dry it with a paper towel or cloth. This will ensure that you have a clean surface to work with and prevent any lingering flavors from the old coil.
Prime the new coil
Before installing the new coil, it’s essential to prime it properly. Priming the coil involves saturating the cotton wick with e-juice to prevent it from burning when you vape. To prime the coil, place a few drops of e-juice onto the exposed cotton wick. Take your time and make sure the wick is thoroughly saturated. This process will ensure that your coil is ready to use and will help extend its lifespan.
Install the new coil
Once the new coil is primed, it’s time to install it into your tank. Screw the coil into the base or top of the tank, depending on your tank’s design. Make sure it is tightened securely but avoid applying excessive force. Once the coil is in place, reassemble the tank by screwing it back onto the rest of the device.
Refill the tank
Now that the new coil is installed, it’s time to refill the tank with e-juice. Use the same e-juice that you were using before, or try a new flavor if you prefer. Fill the tank carefully, making sure not to overfill it. Leave some space at the top to allow for the proper functioning of the tank. Once the tank is filled, give it a few minutes for the e-juice to saturate the coil fully.
Check for leaks
After refilling the tank, it’s important to check for any leaks before you start vaping. Inspect the tank carefully and make sure there are no visible signs of leaking. If you notice any leaks, disassemble the tank again and check that all the components are correctly installed and tightened. Fix any issues before proceeding.
Adjust your device settings
With the new coil in place and the tank filled with e-juice, you may need to adjust your device settings to ensure optimal performance. Depending on your vape device, you may need to adjust the wattage or temperature settings. Consult your device’s manual for guidance on how to make these adjustments. Start with lower settings and gradually increase them until you find your preferred vaping experience.
In conclusion
Changing a coil without losing juice is not a difficult task if you follow the step-by-step guide outlined above. By gathering the necessary tools and materials, preparing your vape device, removing the old coil, cleaning the tank, priming the new coil, installing it properly, refilling the tank, checking for leaks, and adjusting your device settings, you can successfully change your coil and continue enjoying your vaping experience without any loss of e-juice. Remember to take your time during each step, as rushing can lead to mistakes and potential spills. With a little practice, you’ll become a pro at changing coils in no time. Happy vaping!